How do I clean my Intellichlor chlorine generator?

How do you clean a chlorine pool salt generator?

How To Clean A Salt Cell

  1. Turn off pool pump.
  2. Remove the salt cell from the lines/unit.
  3. Rinse the plates with a garden hose.
  4. If you have a Zodiac LM Series salt cell, pour salt cell cleaner into the cell until the plates are covered. Let soak for 15 minutes.


How do you clean a saltwater chlorinator cell with vinegar?


I'm going to use a high-pressure nozzle to hose off the cell. See the white vinegar loosen up there's calcium that was in the cell really well was able to hose off really easily.

How do you clean a pool chlorinator cell?

Quote from the video:
So something wooden a wooden spatula or a wooden ruler. If you need to scrape it. But to be quite honest just to soak it then give it a bit of a tap a bit of a light bang. And hopefully the calcium.

How do you clean a salt water generator?

Quote from the video:
And then what you'll need to do is unplug the cell from your box and then what you'll need to do is loosen the nuts. On the salt cell which i've already done and then you can take the salt cell.

How do you clean a Intellichlor salt cell?

Quote from the video:
It will never reset itself. So you must clean the cell all the time with no power so simply disconnect that and make sure there's no power at all to the cell.

How do you acid wash a salt cell?

Quote from the video:
And the way we clean this is with your attic acid and water. So again we're going to install our clean-out plug into the bottom of the cell. And we're going to fill it about 3/4 of the way with.

Can I use vinegar to clean chlorinator cell?

As a thumb rule, go for a mild solution with a perfect blend of water and vinegar. Soak the saltwater cell or hot tubs (as the case may be) in a container with vinegar solution for a night. The solution can remove all sorts of remaining debris within a fortnight.

See also  How do men wear Birkenstocks with jeans?

How often should I clean my Pentair salt Cell?

Proceed to “How To Acid Wash the IntelliChlor Electrolytic Cell” on the back page. If the electrolytic cell has a tendency to scale, it is recommended that every two months the cell be removed and inspected for scale formation and/or debris.

How often should I clean my chlorinator cell?

At the very least, your saltwater chlorinator should be cleaned twice a year, but you should inspect it every two months just to be sure. If it needs to be cleaned, clean it. If it doesn’t, then just give it a good rinse with a garden hose.

What causes calcium buildup on salt cell?

What causes scale buildup in a salt cell? The salt cell’s ECG can provide a perfect breeding ground for two reasons: heat and high pH production. Heat — The hotter the water, the more calcium tends to drop out of pool chemical solutions and mineralize into a deposit.

Should I remove salt cell for winter?

While this can be true depending on your location, during the colder months you risk the potential of water damage due to freezing throughout your salt cell and equipment. Manufacturers will most likely advise you to remove, clean, and store the unit indoors to avoid any damage.

When should you clean a salt cell?

How often should my salt cell be cleaned? Clean salt cells when scale develops on the metallic (titanium) grids, or once per season at the very least. Too frequent cleaning will erode the coating on the grids, which is what makes them work.

How do I know if my Pentair salt cell is bad?

Further troubleshooting will be required.

  1. If the salt cell bubbles, but only a little bit, then you probably have a bad cell. …
  2. If the salt cell bubbles vigorously, then it is working fine.
  3. If the salt cell is good, but you are are constantly getting a zero chlorine reading in the pool, something else is wrong.
See also  How do you absorb bad smells?


When should I replace my chlorinator cell?

How long should a salt cell last? The answer really depends on the use conditions and how often you do maintenance on your pool. The safe answer is that they usually last for about five to seven years. Salt Cells cost between $200 and $900 to replace, depending on your chlorinator model.

How do you know if your chlorinator is not working?

Test the water that water has just left the chlorinator – it should have a very high chlorine reading. (Remember that if it is extremely high it may bleach the test tablet so you may have to dilute the water you are testing). If there is no chlorine reading, the chlorinator will not be working.

How do I reset my Pentair chlorinator?

Press and hold the “More” button for 3 seconds to enter system status mode. All the lights will scroll across the panel, and then go dark. Only the “Power”, “Cell”, “Life”, and “Low” lights will be lit.

How do I test my pool chlorinator?

Quote from the video:
So what you do is you disconnect the pump from the chlorinator. You take the cell out of its housing. And you drop it in a bucket of water. And this you see this cell needs a bit of a clean.

How do you test an Intellichlor salt cell?

Quote from the video:
You'll notice that it's going to alternate. Between the salt level being good and the salt level being low this will alternate for about five minutes.

How long does a Pentair IntelliChlor last?

Selecting the Correct IntelliChlor Model:



Expect to get about 5 years of use out of your IntelliChlor chlorine generator — it obviously will depend on how much you use it and whether or not you maintain it properly, but, if all goes well, it should last you about five years.

See also  What hair type do you need for waves?

Why is my salt cell light blinking?

If the “Inspect Cell” light flashes by itself it is an early indication that the salt generator needs a manual reset. Each cell is equipped with 500 operational hours and requires a manual reset once it expires.

Why is my salt cell not working?

The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.

Why does my salt water pool have no chlorine?

When the free chlorine level is low, that usually means it’s time to add more salt, but it may mean a couple of other things as well. For instance, low chlorine readings can indicate that you need to increase the chlorinator output or run it more frequently.

Why does my chlorinator says no flow?

The “No Flow” light indicates that the flow switch is not detecting sufficient water passing through. Check the following: cleaning the cell or the filter (see how to backwash a DE Filter or Clean a Cartridge Filter). Replace the flow sensor.

How often should I shock my saltwater pool?

Shock your pool once a week with Salinity Surge Shock or Salinity Oxidizing Shock. Pool shock works as an added defense against bacteria and contaminants. With Oxidizing shock, you can use your pool after just 15 minutes!

How many bags of salt do I need to start my pool?

To reach the initial salt level recommended by the salt system manufacturer (usually 2400-3200 ppm), you will need to add about 200 lbs of pure pool grade salt (NaCl), per 10,000 gallons of water.

Can you put chlorine tablets in a saltwater pool?

A saltwater pool is an alternative to a traditional chlorine pool. Although you don’t add chlorine tablets to a saltwater pool, it does still contain chlorine. It just has a smaller amount that’s generated through the filter system.