How do you calculate stripping and waxing floors?

Example – Strip and Wax 10,000sf VCT

  1. Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
  2. Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
  3. Cost of pads, mops, etc. (

How much should I charge to strip and wax floors?

Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.

How long does it take to strip and wax a floor?

Overall, when using a chemical stripping agent, the stripping process takes about fifteen minutes to sit before applying agitation to the floors. After the wax has been applied, it will cure overnight and can be used the next day.

How many square feet will 5 gallons of wax cover?

This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.

How many coats of wax should you put on a floor?

Always make sure to have more wax on hand than is necessary. You do not want to run out of wax before the job is finished. Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats.

Can you wax a floor without stripping it?

Technically, you do not have to strip the floor before you wax it. However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.

How often is it necessary to strip off the floor polish completely?

It depends on the amount of foot traffic in the facility, say distributors, as well as how that floor is maintained throughout the year. As a rule of thumb, floors are typically scrubbed and recoated every six months to a year, which can stretch out the stripping and recoating process by as much as four or five years.

See also  Is silicone safe for teething?

What to do after stripping floors?

Quote from the video:
Wring out the mop tightly and damp mop the entire area to pick up any remaining residue and moisture from the floor. This step might need to be repeated if the residue isn't removed the first time.

What is the best way to wax a floor?

Quote from the video:
One of the things you need to be mindful of is pieces of debris that may float in the air and settle on your floor you want to get them. While the floor wax is still wet. So it does not bond.

Do you buff between coats of wax?

The wax needs to be wiped into the paint and then you let it dry. Then you go back and buff with a soft t-shirt fabric.

How long should wax sit before buffing?

Wait until the solvents in the wax evaporate before buffing.

Although drying time can take as little as 10 to 20 minutes, a couple of hours or even overnight can be best. The wax is ready to buff when it no longer feels cool or damp to the touch.

Does waxing a floor make it slippery?

Hardwood floors are not naturally slippery, but can become slick after applying a coating of wax or polish, or especially if the floor’s surface is dirty. The best ways to reduce the risk of slipping on your hardwood floor is to keep it clean and dry.

How long does floor wax last?

Generally, solid wax coats can last up to two to five years, and liquid wax coats between one to two years. If no re-waxing interval is given, wipe a cloth dampened with mineral spirits over a small section of your floor and inspect it.

See also  What do you do when your lucky bamboo turns yellow?

Does Swiffer make floors slippery?

On the pergo, yes. Slippery as can be. On the plus side my floors look AMAZING.

Does Pine Sol make floors slippery?

Not only does this product puts a film on the floor it also makes the floor very slippery. Pine Sol. Again leaves a residue on the floor that can build up over time and be harder to remove.

Is Murphy’s oil soap good for hardwood floors?

Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.

Can you use Dawn dish soap on hardwood floors?

Over an extended period, vinegar may accelerate the dulling of your hardwoods. An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge.

How do you get rid of bona buildup?

Quote from the video:
You want to work in small sections about ten square feet so let's start by applying a generous amount to the polish remover gently squirt the polish remover out of the bottle.

Will bona ruin hardwood floors?

Bona products are specially designed to protect floors and the environment. Bona cleaners won’t dull your floors or leave behind any residue.

Why does bona leave streaks?

Streaks usually come from a combination of possible residue in the cleaner and existing dirt on your floor. Many cleaners on the market can be used on multiple surfaces and claim they are safe for wood; however, hardwood is a sensitive surface and needs to be treated with care.

Why do my wood floors look cloudy?

Why Are My Hardwood Floors Hazy? The most common causes of a hazy or cloudy film on hardwood floors after cleaning are a buildup of floor cleaner, wax buildup, trapped moisture, and bad floor cleaners. All these can make wood floors appear to have a milky, white substance on top of the surface even after cleaning.

See also  How long do dried eucalyptus leaves last?

How do you remove wax from a wood floor?

Quote from the video:
Best thing to use to clean your hardwood floors is vinegar. And water a splash of vinegar in a bucket of water. Will. Clean your floors. They'll be nice and shiny. And there will be no waxy build-up.

Should I wax my hardwood floors?

Hardwood, including parquet.

All hardwood floors, whether made from new or recycled wood, or even vintage floors that have been in place a century or more, need periodic waxing. Floor wax helps seal the porous wood surface, protects it from stains, hides scratches and dents and increases shine.

How do you remove haze from wood?

Mix a one-to-one ratio of water and vinegar, dampen a cloth, and rub off the hazy buildups. Rinse with another cloth dampened with clear water and dry the floor immediately with a third rag. Washing coupled with wear and tear can eventually make the hardwood floor look old and cloudy.

Is vinegar safe on hardwood floors?

Vinegar is an acid and hardwood floors need a pH neutral or close to it cleaner. When mixed with water, the solution’s acidity is drastically lowered and it becomes an effective method to wash hardwood floors. The vinegar and water mixture cuts through dirt and grime, leaving a streak-free and naturally clean floor.

How do I make my hardwood floors look new without refinishing?

Quote from the video:
And so this is a perfect perfect floor to put down that Minwax hardwood floor Reviver. Now you can get this stuff at your big box stores like Home Depot.