How do you clean a HoMedics foot bath?

Clean the surfaces of the foot spa with soap or detergent, rinse with clean water, and drain. After cleaning, disinfect* the surfaces with an EPA-registered hospital disinfectant (see label description) according to the manufacturer’s directions on the label.

How do I clean my foot bath?

Disinfect the foot bath with an intermediate level disinfectant, such as 2 tsp of bleach with 2 cups of water allowing the disinfectant to contact the surface for a contact time of 10 minutes. 4. Drain the basin and rinse with clean water.

How do you disinfect a foot spa machine?

Fill the foot spa with water and 2-3 tablespoons of low sudsing detergent and turn on the re-circulation system. Allow it to run for 5 minutes. 4. Drain and rinse the spa again, refill the spa with an intermediate level disinfectant, such as 2 tsp of bleach per 2 cups of water.

How do you clean an electric foot spa?

Cleaning and disinfecting foot spas

  1. drain the water from the foot spa.
  2. clean the surfaces of the foot spa, wash with warm water and detergent.
  3. rinse with hot running water.
  4. dry with a lint free cloth.
  5. disinfect with a chlorine based disinfectant (bleach). …
  6. rinse in hot water.
  7. dry with lint free cloth.

Why sanitizing foot spa equipment is important?

Sanitizing reduces the growth of viruses, fungi, and types of harmful bacteria. You can clean every day, but you should always sanitize and also disinfect to keep your home or workplace safe.

What is the most common disinfectant used in the spa industry?

Two types of alcohol are used as disinfectants in the salon. They are ethyl alcohol and isopropyl alcohol. To be effective, the concentration of ethyl and isopropyl alcohol must be 70 percent or higher. Alcohol can be used to disinfect some items used in the salon, especially porous and absorbent items.

See also  Can plumeria trees grow in Northern California?

How often should a pedicure tub be cleaned and disinfected?

Once every week soak the foot spa with disinfectant overnight. Always follow the manufacturer’s instructions for cleaning and disinfection.

What types of disinfectants are used in spas?

Bromine and chlorine are the most widely used sanitizers for hot tubs and swimming pools. Bromine tablets are loaded into a handy Floating Bromine Feeder for mixing with the water.

How often should you sanitize your hot tub?

A light weekly cleaning is essential for hot tub care and your health and safety. You should plan to drain your spa completely for a thorough cleaning every three to four months. You should drain and clean your hot tub more often if you’re using it regularly, or having a lot of guests in it, or both.

When should I shock my hot tub?

Shock dosing your hot tub water is a term usually applied to the process of adding a higher than normal dose of oxidiser chemical to the hot tub water, this process can also be called oxidising. We advise customers to shock dose their water once a week to control bacteria growth and destroy bather impurities.

How soon can you use hot tub after adding chemicals?

Do not use a hot tub right after you add chemicals. You should wait at least 2 hours before using the hot tub again. The chemicals need time to work their magic and sanitize the water. Also, a higher concentration of chlorine is best because you’ll need to add chemicals less often.

How often should I add chlorine to my hot tub?

You should put chlorine in your hot tub at least once a week. However, some people prefer to add a small amount after each use. Finding the best water care routine will depend on how often and how many people use it. Chlorine levels should be between 1.5 and 3.0 ppm.

See also  How do you replace a pop up ball rod?

What happens if I put too much chlorine in my hot tub?

If theres too much chlorine it will vaporise and form gas that floats just above the surface of the water. If this vapor is inhaled it can inflame airways and exacerbate certain breathing conditions. Read more What Temperature Should My Spa Pool be at and Why?

Can I switch from chlorine to bromine in my hot tub?

Can you switch from chlorine to bromine? You can switch from chlorine to bromine sanitizer in a hot tub. In fact, it is actually easier to go from chlorine to bromine than the other way around.

Which is better for spa bromine or chlorine?

If you have a spa, bromine has a lot of advantages over using chlorine. It may cost a little bit more, but it lasts longer and does a much better job than chlorine at killing bacteria, especially at high temperatures and high pH levels.

Which is safer chlorine or bromine?

Bromine: Is gentler on your skin than chlorine, but can be a bit more difficult to wash off after a long soak. If you or anyone who uses your hot tub on a regular basis has sensitive skin or any kind of upper respiratory difficulties, bromine will likely be the better choice.

How many bromine tablets do I put in my hot tub?

Introduce 1 tablets per 100 gallons of spa water with the use of a floating tablet feeder or automatic brominator installed on the spa equipment. Adjust tablet feeder or brominator to obtain an active bromine residual of at least 2 ppm.

See also  Can you waterproof a hat?

Where do you put bromine tablets in hot tub?

The bottom cap load bromine tablets in the neck of the feeder and replace the cap. The top portion of your feeder unthreads. From the neck allowing. More or less water flow to the tablets.

Are bromine tablets better than granules?

Absolutely. As long as you follow the manufacturer’s instructions for both the hot tub and the bromine, you can use bromine regularly for treating and sanitizing your spa. However, it may be wise to use bromine granules instead of bromine tablets. This will lessen your direct interaction with the chemicals.

What are the side effects of bromine?

Breathing bromine gas could cause you to cough, have trouble breathing, get a headache, have irritation of your mucous membranes (inside your mouth, nose, etc.), be dizzy, or have watery eyes. Getting bromine liquid or gas on your skin could cause skin irritation and burns.

How do you clean up a bromine spill?

Soln or slurries of 10-50% potassium carbonate, 10-13% sodium carbonate, & 5-10% sodium bicarbonate or saturated “hypo” soln (prepared by dissolving 4 kg of technical-grade sodium thiosulfate in 9.5 l of water & adding 113 g of soda ash) are preferred neutralizing agents for liquid bromine spills.

How long does it take for bromine to dissipate?

Over time, it will break down. Give your hot tub a day or two to use up some of the extra chlorine or bromine in the water before you use it. In a day or so those excess levels will vanish into thin air.