Is Pine Sol a good floor cleaner?

But if your wood floor is in a high-traffic area, such as a kitchen, it may sometimes require a more concerted cleaning effort. Pine-Sol is an effective cleaner as well as a deodorizer and disinfectant that has been around since 1929, and is suitable for wood if used properly.

Is Pine-Sol good for mopping?

You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3′ x 3′ area and start mopping.

Do you have to rinse Pine-Sol off floors?

A: Yes. Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain.

What is the best thing to clean floors with?

For a deep clean, probably every week or so, mix 6-7 drops of a mild detergent (dish soap is usually fine) with one gallon of warm or hot water. Use the mixture to dampen a mop, and clean the floor in sections. Make sure the mop is damp and not dripping wet, since standing water can damage linoleum.

What surfaces should you not use Pine-Sol on?

A: We do not recommend using Original Pine-Sol® Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.

Which is better Pine-Sol or Fabuloso?

What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.

See also  Is Bergamot good for lowering cholesterol?

What can I clean with Pine-Sol?

You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!

How do you mop Pine-Sol floors?

With your water use about a gallon water to about a quarter cup of your pine sille you can throw a little bit of vinegar in the water.

Can you mop wood floors with Pine-Sol?

Hardwood Floors Steps To Clean

Add ¼ cup Pine-Sol® to a bucket with about a gallon of water. Mop your floor with the mixture. Try not to let liquid pool, which can warp and streak wood. Scrub stains and shoe marks with full-strength Pine-Sol®.

What does it mean when you smell Pine-Sol?

Quote from the video:
But it's also natural pine sol is made with real pine essential oil besides pine oil the ingredients include grease cutting surfactants. And powerful cleaning agents. Water isopropyl.

How much should I dilute Pine-Sol?

Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.

How do you disinfect floors?

Most hard surfaces recommend a bleach solution for disinfecting, but often you’ll want to keep bleach and other harsh chemicals away from your flooring. Instead, you can disinfect vinyl and laminate flooring by mopping with a mix of one gallon of warm water and one cup of white vinegar.

Is pine cleaner disinfectant the same as Pine-Sol?

Quote from the video:
Inside with the fresh scent of pine salt disinfectant. Instead of masking odors this multi-purpose cleaner wipes out odor causing bacteria. And cuts through grease and grime.

See also  Can you rivet nylon webbing?

How toxic is Pine-Sol?

The only health hazard listed on the MSDS is that it is an irritant. Pine Sol also contains strong scents that are not listed as hazardous ingredients, but artificial fragrances in and of themselves can contain many hazardous substances.

Is there bleach in Pine-Sol?

The active ingredient in Pine-Sol is glycolic acid. According to the Department of Health, mixing chlorine bleach with acid produces chlorine gas. Chlorine gas irritates mucous membranes, causing coughing, breathing problems, and burning eyes.

How poisonous is Pine-Sol?

Pine-Sol contains ingredients like detergent, pine oil and even some alcohol, which experts say can be dangerous. “If somebody drank a large amount of this pine cleaner then they could pass out. They could go into a coma. They could have seizures.

Is Pine-Sol safe on hands?

As long as you take basic precautions like wearing gloves and use Pine SOL in a properly ventilated area, it should not cause any issues. Modern Pine SOL is safe and even its pine oil containing variant is only dangerous in copious amounts.

Is there alcohol in Pine-Sol?

In 2008, the material safety data sheet for the “Original Pine-Sol Brand Cleaner 1” formulation listed 8–12% pine oil, 3-7% alkyl alcohol ethoxylates, 1-5% sodium petroleum sulfonate and 1-5% isopropyl alcohol.

Is Pine-Sol water based?

Compared to other cleaning products typically used on hardwood floors, Pine Sol is relatively safer,as it’s a water-based cleaner. It offers various advantages over wax-based, oil-based, and ammonia-based hardwood cleaning formulas.

What is active ingredient in Pine-Sol?


See also  Are flour sack towels absorbent?


Is Pine-Sol a natural cleaner?

Pine-Sol is a chemical-based household cleaning product manufactured by Clorox. A mixture of borax, lemon, natural liquid peppermint soap and water is an effective and pleasant-smelling household cleanser that can be used on hardwood and tile floors.

How do you clean a bathroom with Pine-Sol?

Steps For An Expert Clean

Add ½ cup of Pine-Sol® to the water. Dip a sponge or scrubber into the bathtub and wipe down the tub and faucets. For cleaning stubborn rings around the bathtub, drain the water and apply full-strength Pine-Sol® directly. Scrub down with a scrubbing brush and rinse with water.

Can you put Pine-Sol in toilet bowl?

Wipe down the toilet tank, lid, seat cover and outside of the bowl, reapplying more cleaner as needed. Rinse each surface with water. Splash Pine-Sol® into the toilet bowl and hit every crevice with your trusty toilet brush. Let it sit for a few minutes and flush.

Can I use Pine-Sol to clean my shower?

Pine-Sol can help you with shower cleaning, walls, and more. Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Mix ⅛ cup of Pine-Sol® in ½ gallon of warm water. Wipe down your shower walls with the mixture.