What does f4 mean on a hot tub?

8 hours daily filtration

CODE ERROR CODE DESCRIPTION
F4 8 hours daily filtration; system message, not an error
F6 12 hours daily filtration; system message, not an error
F Fahrenheit, used to indicate panel is in Fahrenheit mode; system message, not an error
FB-ER Fiber optic error; accent lighting

What is F4 on hot tub?

F2, F4, F6 – Displayed by some hot tubs to show how long they are set to filter. F2 = 4 hours, F4 = 8 hours and F6 = 12 hours. Hold – Displayed when panels buttons have been hit too many times, or too quickly.

What does F4 mean on Balboa hot tub?

Spa Side Error Codes

OH Overheat Protection (Heater is deactivated, pumps low speed is activated).
F2 Panel sensors have been pressed too many times in a short period of time.
F4 Circuit Board temperature has exceeded acceptable limit.
F6 Freeze protection. No action is necessary.
FC Freeze protection. No action is necessary.

What mode should my hot tub be?

Economy is a good setting for those who use the hot tub daily. The drop in temperature fluctuates during the year from minor or no temperature falls in the summer, to larger drops in the coldest part of winter.

How do I fix error code e04 on a lazy spa?

Remove the pump from the liner by placing the stopper caps on the inside over the debris screens. Take the spa pump off and place this in a cool area or inside. Once this has cooled down for 1 to 2 hours, reattach the pump to the liner and complete the full reset. This should resolve the issue with the error code.

What does E4 mean on hot tub?

The Big List of Spa and Hot Tub Error Codes

CODE ERROR CODE DESCRIPTION
E4 Short circuit/closed pressure/flow switch
E7 Improper electrical connection
Ecdu, Ecn, Econ Spa is in economy mode; system message, not an error
EO Short circuit temperature sensor

How do you fix the SN code on a hot tub?

Quote from the video:
Power. Up if it's still doing it will do a known good sensor on the right hand side we'll take the one that is leave the new one on the left. And take the one from the left and put it on the right.

See also  What men wore in the sixties?

What are the codes on a hot tub?

Hot tub error codes

  • CoLd : Temp in heater housing is below 40° F. …
  • OH : Overheat. …
  • HLoH : Hi Limit Over Heat. …
  • SEoP : Sensor open or disconnected. …
  • SESH : Sensor short, nonfunctional. …
  • PSoC : Pressure switch open with circulation pump.
  • PSoL : Pressure switch open with low pump.
  • PSoH : Pressure switch open with high pump.

What does STD mean on a hot tub?

Std = Spa operating in Standard Mode. Ecn = Spa operating in Economy Mode. SE = Spa operating in Standard-in-Economy Mode.

How do I get my hot tub out of ECN mode?

Quote from the video:
So you just hit warm. And light warm and light you have to hit them very closely back to back and you'll get it back on standard.

What is E04 error on a glucometer?

“E-4” in the display means not enough blood or control solution was drawn into the test strip for measurement or was applied after the test has started. Discard the test strip and repeat the test.

How do I fix error code E02 on a lazy spa?

Please follow these steps to resolve this:

  1. Remove the spa pump from the liner, with the stopper caps placed on the inside. …
  2. Empty the spa fully of water.
  3. Remove the stopper caps and place a hose on the inside of the spa, up against the debris screen.
  4. Complete this for 5 minutes on each debris screen.

What does E4 mean on a treadmill?

Quote from the video:
The e4 error code is displayed in the speed window when the treadmill is running at a low speed. One mile an hour or less. While set to run at a higher speed.

See also  Is Thyme good for eczema?

How do I fix E4 error on treadmill?

Resolution: Check to ensure that the motor cables are securely connected to the controller. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables. Once all cables have been completely reattached, plug in and turn on the treadmill.

What does E5 mean on a treadmill?

E5. The E5 Error is specific to the TR2000e and the TR3000e treadmills. The error code triggers when an object is detected by the folding sensors on the underside of the treadmill. The folding sensors look like small trapezoids: two on the back and two on the front.

What does e02 mean on a treadmill?

The error code E2 is indicating that the console is not receiving any information from the reed switch or optic sensor. This is because the treadmill belt is not turning. If the motor would run you would lose the E2 error. Diagnosing why the motor is not running will require a technician and some test equipment.

What does E07 mean on treadmill?

Yes No | Report abuse. E07 means that the safety stop (red rectangle magnet) has come off. Simply reattach and that error will go away.

What does Error 3 mean on a treadmill?

E03 error code: 1,Turn on the treadmill , motor running a few seconds then stop and console board shows E03, probably the Speed sensor issue. 2,Turn on the treadmill,motor can’t runing and console board shows E03, probably the control board issue . Test the motor first to check if the motor can runing normally.

What does e3 mean on a treadmill?

Quote from the video:
So it's basically a simple feedback. System which is working in a loop to maintain a certain speed.

How do I fix error code E3?

Troubleshooting An E3 Error Code



First, you should check the wiring of the fan motor to make sure everything is connected properly and not loose. It is possible that the fan motor or the control board will have to be replaced.

See also  How do you install vinyl flooring on top of vinyl?

How do I fix E3 error?

Quote from the video:
Check the signal connection cable use motor rotation hand replace new motor for indoor unit Dyk. And air conditioner.

How do I fix E3 error on my washing machine?

Quote from the video:
Machine. Such as coins cards screws etc if so remove them in case of abnormal vibration or e3 alarm first check whether the washing machine is placed on flat.

How do I fix E4 on my washing machine?

Quote from the video:
If it is blocked please clean it. After ensuring the normal water and flow of the washing. Machine check whether water fills and drains at the same. Time.

Why is my washing machine showing E4?

When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The inlet hose may be clogged or kinked.

What does E4 mean on Midea washer?

Midea Top Load Washer Error Code: E4



ERROR CODE DEFINITION: Clothing load is out of balance. ERROR CODE SOLUTION: Move clothes around in drum to balance the machine.

How do I fix E4 error on Whirlpool washer?

The F2 E4 alert indicates there is an issue with the user interface or associated wiring. Unplug the washer, wait two minutes, then plug back in.

How do I fix E4 error in IFB washing machine?

The problems that are user correctable are – power and water supply, cleaning of the inlet hose and the coin filter. Switch off the machine, reset the program to OFF and then try again. If the problem is not solved, well, you need to call the service centre.