What is Lanox?

LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base with specialized chemical compounds. LANOX contains no silicon, kerosene, acids or dieselene.

What is LANOX made of?

LANOX Lanolin Lubricant is a heavy duty, anti-moisture, anti-corrosion lubricant made with a high grade oil and lanolin base, with specialised chemical compounds. LANOX Is created with Lanolin, a natural wax found in animal wool, especially the wool from sheep, commonly referred as ‘WOOL FAT’ or ‘WOOL GREASE’.

Can you paint over LANOX?

Welding and coatings



INOX-MX3 can be painted over with oil based primers without first removing the INOX-MX3 coating. … INOX-MX3 and LANOX-MX4 will not harm painted, enamelled and powder coated surfaces or finishes.

Is LANOX good for rubber?

LANOX-mx4 is harmless to metal points and surfaces, plastics, painted and enamel finishes, fibreglass, formica, rubber or neoprene seals. LANOX-mx4 is non-conductive, non-static and non-corrosive.

What is lanolin spray used for?

This Rust Prevention Lanolin Lubricant is a highly effective formulation for long term corrosion protection on metal surfaces under extreme climatic and high humidity conditions.

Is INOX MX3 lanolin?

MX4 is made from Lanolin, a natural wax found in animal wool. Although INOX-MX3 is a quality anti-corrosion lubricant, there are instances where a lanolin-based lubricant like LANOX is better suited for the job.

Is INOX better than wd40?

Why is INOX a better lubricant around the home? INOX doesn’t gum up, become sticky or gooey, DOESN’T DRY OUT OR WASH OFF WITH WATER. Other WD type sprays because of their solvent base tend to evaporate quickly, where INOX because of its lubricating oil base will last much, much longer.

Is INOX MX3 the same as WD40?

Inox MX3 is a light oil with lanolin (wool grease) added. The lanolin stops it evaporating (I like WD40 which does evaporate and rapidly).

See also  How do you use xylene?

Is INOX safe on rubber?

INOX is safe on rubber, and is ideally suitable for all plumbing O-rings & seals, Food machinery O-rings & seals, Pneumatic control valve O-rings & seals, Diving gear O-rings & seals, anywhere rubber or synthetic O-rings and seals are used.

Is INOX good for locks?

INOX-MX3 readily penetrates all forms of corrosion to free up hinges, locks, nuts and bolts, shafts, chains, light fittings, switches, control cables, water faucets, toilet cisterns, etc and will keep them free and serviceable for months on end.

Is Inox flammable?

Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria. HAZARD STATEMENT: H223: Flammable aerosol H280: Contains gas under pressure; may explode if heated. P210: Keep away from heat, sparks, open flames and hot surfaces.

Can you use Inox on battery terminals?

What applications does INOX have in Marine ? Use INOX-mx3 to lubricate and protect from corrosion, battery terminals, wiring, switches, lights, bilge pumps, outboard motors, alternators, starter motors, winch and control cables.

Can you use Inox on wood?

INOX MX3 or LANOX MX4 will not harm any timber or plastic stocks or grips or the blued or blackened metal coatings on guns.

Does lanolin prevent rust?

Liquid lanolin is also a long-lasting lubricant that keeps your equipment rust-free. It achieves this by penetrating through rust and loosening the structure to make it fall off.

How do I use INOX?

Add Inox-Mx3 to a lint free cloth or an old t-shirt, clean off rails and make sure to wipe off excess solution from your track. Add a drop of the Inox-MX3 to the braids on your slot car and run it around your layout a few times. Again wipe off any excess before racing.

Does lanolin affect rubber?

It provides long lasting lubrication and corrosion protection against moisture, salt and acids. … It is safe to use on a variety of surfaces including metal, plastics, fibreglass, rubber and neoprene seals.

See also  When should you prune Jasmine?

How do you use Lanox?


Now before you open the bottle and put this in here. And got to give the bottle give it a good shake mix it all up it's well mixed up do the job that's what I. Do. Now ready to get started.

Are sheep killed for lanolin?

Technically-speaking, sheep do not die as a direct result of lanolin production because it is obtained from their wool. However, as sheep age, their wool production gradually slows (just as humans lose density in eyelashes, eyebrows, and hair).

What is the best rust inhibitor spray?

The 6 Best Rust Prevention Spray for Cars

  1. BOESHIELD T-9 Rust & Corrosion Protection – Best Overall. …
  2. Rust-Oleum Automotive Rust Reformer Spray – Best Value. …
  3. WD40 Long-Term Corrosion Inhibitor Spray – Premium Choice. …
  4. Permatex Rust Treatment. …
  5. Fluid Film Powerful Rust & Corrosion Inhibitor.

Will wd40 stop rust from spreading?

4) Coat the Rust Probe Areas with WD-40



Then use WD-40 to help prevent rust even further. This lubricant does not just prevent rust but protects your car in all weather conditions and keeps the parts dry. It penetrates the areas on a deep level and prevents them from oxidizing further.

What can I spray on metal to prevent rust?

WD-40 Specialist® Corrosion Inhibitor is an anti-rust spray ideal for preventative maintenance and use in extreme environments such as high humidity. It provides non-drying protection that stays where you spray it.

How do you stop rust from spreading on your car?

Avoid salt-covered roads when possible and periodically wash the vehicle’s undercarriage followed by spraying or painting the frame with a rust preventative. Treat any surface rust immediately to stop it in its tracks before it spreads and becomes a serious problem.

See also  Can you iron a Jostens graduation gown?

Can I spray WD-40 under my car?

Don’t only spray it on the exterior body of the vehicle, but also spray it well on the underside of the car which is more prone to getting rusty. With a coat of WD-40, your car will remain free from the trouble of rust and the difficult methods to get rid of it.

Can rust be stopped?

Can rust be stopped? Yes, car rust can be stopped from spreading. However, the ideal fix will depend on the type of rust. Surface and scale rust can be stopped by sanding the rusty paint and spraying primer, color coat, and clear.

Can you use WD-40 on car rust?

WD-40 is designed to loosen the bonds between rust and the metal surface it has adhered to by penetrating the porous layer of rust and using its lubricating properties to loosen it. To remove surface rust, simply spray it on the rusted surface, leave it for around ten minutes and let it get to work on the surface rust.

Will WD-40 hurt car paint?

In addition to preventing bugs from hitting your vehicle, WD-40 is also a great option for removing already stuck-on bugs, bird droppings, tree sap, and grime. It won’t damage your paint; just remember to rinse it off with soap and water afterwards.

What should you not use WD-40 on?

But Don’t Spray It On:

  • Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt. …
  • Bike chains. WD-40 can cause dirt and dust to stick to a chain. …
  • Paintball guns. WD-40 can melt the seals in the guns.
  • Locks. …
  • iPods and iPads.