What is zappit73?

The Zappit 73 Pool Shock is 73 Calcium Hypochlorite with 70 available chlorine. This granular formula comes in a bucket and saves you time and money by quickly dissolving to destroy waste, algae, and bacteria in your swimming pool.

Is Zappit a chlorine?

Zappit has a high chlorine content and, most importantly, no cyurannic acid(CYA) to over-stabilize the chlorine! Using another shock which included cyurannic acid stabilizer, it took draining half of the pool water to get the CYA level back to normal.

What is Cal shock?

Calcium Hypochlorite (Cal Hypo) is a calcium-based granular chlorinated shock that can be used as a maintenance or treatment product. Cal Hypo has the highest percentage of available chlorine and is extremely effective at eliminating algae.

Who makes Zappit pool shock?


NAZHUA Zappit 73% Cal Hypo Pool Shock – Calcium Hypochlorite Super Shock 50lb.

Does power powder plus CYA?

Power Powder Plus is Cal-Hypo (calcium hypochlorite) and has no CYA in it. However, it does increase Calcium Hardness (CH), though that isn’t as much of a problem in the short term unless your water is already saturated with calcium carbonate.

Is Zappit 73 stabilized?

Zappit has a high chlorine content and, most importantly, no cyurannic acid(CYA) to over-stabilize the chlorine!

Is bleach a powder?

Calcium hypochlorite is an inorganic compound with formula Ca(OCl)2. It is the main active ingredient of commercial products called bleaching powder, chlorine powder, or chlorinated lime, used for water treatment and as a bleaching agent.

Does Cal Hypo increase pH?

In addition to raising available chlorine, cal hypo boosts pH, alkalinity and calcium hardness (CH) levels. Trichlor has the opposite effect on pH and alkalinity — reducing it.

See also  How many layers does a fingernail have?

Does Cal Hypo raise pH?

Both an oxidizer and sanitizer, cal hypo is quick dissolving and is the most frequently used in the pool industry. It will slightly raise your pH, so make sure you adjust pH while using it. As the name implies, it will also raise your calcium hardness levels in your pool slightly.

How much calcium does hypo add?

Cal Hypo: Every pound needed for proper FAC increases the calcium hardness by 8 ppm.

Does pool shock contain cyanuric acid?

Shock does not contain any cyanuric acid, so after 24 hours, the elevated amounts of chlorine are no longer in the pool. as 90 percent of the chlorine in the water in two hours.

Does Chlor Brite raise cyanuric acid?

Chlor Brite

Dichlor contains Cyanuric Acid (CyA), so it’s perfect if your pool has low CyA. Chlor-Brite can also be used for hand-feeding your pool.

Is Leslie’s Chlor Brite the same as shock?

Leslie’s Spa Chlor Brite Granular Chlorine is a quick, fast dissolving, concentrated formula that can chlorinate or shock your spa/ hot tub to keep it sparkling clean.

How do you use Leslie’s Chlor Brite?

ROUTINE USE: Broadcast 3 ounces of Leslie’s Swimming Pool Supplies Chlor Brite per 10,000 gallons of pool water every other day, or as needed, to maintain a Free Available Chlorine (FAC) level of 1-4 ppm. This quantity may vary based upon bather load, water temperature and other conditions.

What is the difference between Chlor Brite and shock?

Dichlor pool shock is a fast-dissolving solution and will not raise the pH level or cloud the pool water. … Weekly use of Chlor Brite supports the sanitizing efforts of both tab and salt sanitized pools. Chlorine-Free pool shock is great for quickly oxidizing contaminants, but it will not kills germs or algae.

See also  What era were poodle skirts from?

What do you add to a pool if the pH is too high?

When you’ve determined that your pool pH is too high, there are two ways you can balance it: dry acid or muriatic acid. If you’re using a dry acid, use these steps: Follow the manufacturer’s instructions on the package. Use the recommended amount only.

Will baking soda lower pH in pool?

Depending on what PH you wish to achieve, adding a little baking soda will simply not affect the PH level of your pool, thereby causing it to remain almost the same way (acidic). However, adding too much baking soda might also raise the PH level of your pool to an undesired stage (alkaline).

Can I use vinegar to lower pH in pool?

Ordinary household vinegar could in theory be used to lower the pH of your pool. The pH of vinegar is about 2.5, which is quite acidic when compared to your pool water. Household vinegar is very weak though (when compared to a strong acid like muriatic acid), so you would need quite a bit to lower pH.